Question: How do you wire a single pole light switch?

Where does Hot wire go on light switch?

The black (hot) wire goes to the brass screw or into the hole in the back of the device on the same side as the brass screw. This wire is sometimes red. The green or bare copper (ground) wire, if the device has one, attaches to the green screw terminal on the switch or to the electrical box.

Why is there a red wire in my light switch?

What are Red Wires? Red wires are usually used as secondary hot wires. Red wires are also hot and should be clearly marked to avoid the dangers of electrocution. Red wires are commonly used when installing ceiling fans, where the light switch maybe.

Why does my light switch have a red wire?

Red wire: The second hot/traveler wire is the red wire that serves the same purpose as the black wire between the two switch boxes. Depending on toggle switch configuration, either the red wire or the black wire will be hot if the light is on, but not both.

Contact us

Find us at the office

Hurtarte- Aminov street no. 34, 93309 The Valley, Anguilla

Give us a ring

Oluwadamilola Gleich
+93 552 509 928
Mon - Fri, 8:00-17:00

Tell us about you