Question: How do you connect a hose to an outside faucet?

How do you connect a hose to an outdoor faucet?

Connecting to an Existing FaucetTurn off the water to the faucet. Unscrew the aerator from the faucet spout. Screw on a garden hose adapter and tighten it with the pliers. Screw on an anti-siphon valve. Screw the hose onto the anti-siphon valve and tighten the connection by hand.

How do you hook up a hose?

0:130:59How to Use Hose Connectors - YouTubeYouTubeStart of suggested clipEnd of suggested clipTool push the ring down to lock the connectors. Together disconnect the two ends by pushing backMoreTool push the ring down to lock the connectors. Together disconnect the two ends by pushing back down on the ring and pulling them apart to quickly connect your hose to the spigot attach.

How do you fit a hose end connector?

0:562:02Brass tap fittings hose connections - YouTubeYouTube

How do you measure a hose connector?

To determine the size of your connector measure its inside diameter. Do this by laying a tape measure over the mouth of the connector and reading the measurement from the inside wall of one side of the connector to the opposite inside wall. Dont measure to the outside of the wall, that diameter is larger.

What size is a standard garden hose connector?

5/8” Sizes of Garden Hose Connectors The most common size garden fittings come with is 5/8” and 11.5NH( 5/8” being the diameter while 11.5NH is the thread pitch). Hoses for commercial purposes like the watering of public parks regularly come with bigger hose size of 3/4″ and 11.5NH.

Contact us

Find us at the office

Hurtarte- Aminov street no. 34, 93309 The Valley, Anguilla

Give us a ring

Oluwadamilola Gleich
+93 552 509 928
Mon - Fri, 8:00-17:00

Tell us about you